
Add to Cart
Octagonal 35FT 110kv Steel utility Pole with steel climbing rung for transmission line
Quick Infromation
Power Distribution Poles are required especially in populated areas where these poles are favoured because they require less space than lattice towers and are more acceptable visually. Weighing of the steel made Power Distribution poles is approximately 50-70% less than comparable wood structures, the steel poles are easier and less expensive to handle and install.
Technical Data Sheet
Sub Transmission Range | ||||
---|---|---|---|---|
Product Code | Length | ULS | Pole Dimension | |
Top | Base | |||
18.5M 24KN | 18.5M | 24KN | 210 | 660 |
18.5M 40KN | 18.5M | 40KN | 260 | 730 |
21M 40KN | 21M | 30KN | 220 | 697 |
21M 40KN | 21M | 40KN | 260 | 795 |
24M 30KN | 24M | 30KN | 220 | 755 |
24M 40KN | 24M | 40KN | 300 | 760 |
Note:Tapered 12-sided, direct buried |
Options:
• The Power Distribution Pole is available in various length, diameters and hole arrangements.
• Multisided or Tapered round variations.
• The Power Distribution Pole covers Voltage between 10-220KV.
• The Power Distribution Pole includes: suspension pole, stain pole and angle pole in different forms.
• Standard Corrosion Protection: hot dip galvanising (above and in-ground)
• Additional in-ground protection is available for special circumstances (soil condition). For example: Epoxy Coating.
• Pre-drilling for removable safety steps is available.
• Cross arms available.
10 Reasons That Steel Poles Make Sense According to research, here are the primary reasons wooden and concrete utilities are switching to Steel Utility Pole:
• Easy to Handle
• Light Weight
• Long Life
• Cost Effective
• Low Maintenance
• Sustainable
• Durable
• Safe
• Aesthetics
• Engineered for Strength
The information to inquiry or purchase
-Steel pole height and force
-Cross arm type and length,the position to install in the steel pole
-The method to fix the cross arm(use bolt to connect or use one or two template to weld in the steel pole to install the cross arm)
-Safety factor of the steel pole
-Wind speed
-Type of climbing rung
-Destination port
-Other.
Accessories:
Company Introduction:
Jiangsu Milky Way Steel Poles which established on 1991 is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port .
Our Company has 24 years experience on producing the steel poles including the transmission power pole,street light pole,high mast pole and so on.
We exported to oversea countries since 1991 and our products have been delivered to more than 70 countries and areas ,including America,Australia ,Russia ,Germany ,Span,Philippines ,Malaysia,Africa and so on.
We are the supplier of many big project in many countries,like the street light pole of Dubai Tower.the high mast pole for Sochi Winter Olympic Game and so on.